CLEANING EQUIPMENT

Apart from the possibilities of vehicle care and maintenance shown here, PRO-TEC also offers purposely designed technical equipment for cleaning the fuel system as well as the oil and lubrication systems of all petrol and diesel engines. In this way preventative steps are taken quickly, priceworthy and professionally against disturbance such as engine shaking, spluttering and intermittent misfires. The use of the equipment is marked by an easy operation and efficient use

PRO-TEC APPLICATOR WITH ADAPTER

PRO-TEC ECS PREMIUM PLUS/X
Is an innovative new development for the professional cleaning of the oil and lubrication circulations and includes the following drawing off of the waste oil and the effective cleaning of
the complete fuel line system from tank up to the combustion chambers in just one working step. The complete cleaning process is controlled and monitored by micro processors. Thereby the oil temperature, the oil viscosity, the fine dosage of the cleaning fluid and the complete drawing off of the waste oil is monitored. The unit can be used for both petrol and diesel engines and due to the possibility of selecting the electricity supply of either 12 volts or 220 volts, can be used either as a portable or a stationary unit. .

Makes possible a complete and carefull cleaning of the intake manifold, the valves, the combustion chambers and the exhaust reefed system. The adapter allows the connection to various intake pipe diameters of petrol and diesel engines and allows for an exact dosage of the air/cleaner mixture.

PRO-TEC APPLICTOR FLUID

These are two special cleaners which have been purposely developed for exclusive use with the PRO-TEC Applicator, petrol Applicator Fluid and Diesel Applicator Fluid are swirled through the Applicator and sucked into the air intake manifold. There, they clean the complete intake maifold and the complete combustion chambers. Due to the achieved cleaning results, the motor runs smoother and more even, further the fuel consumption and exhaust emission are reduced.

PRO-TEC CLEAR FLOW

Is used to clean contaminated and sticky jets or injection nozzles. In addition, the problems caused by coked inlet and exhaust valves are lastingly cured.